BS EN 6349 2000 - MARITIME STRUCTURES
|D O W N L O A D|
This technical code was prepared to address the conditions pertaining to the UK and; note that local conditions may also necessitate some modifications. The reference is actually made to BS not ES due to the most relevant European Standards being in the pre-standard form. The user shall apply some engineering judgement to properly determine if the recommendations of this code shall be followed and, if so, when they shall not.
The present code is intended for use by the industry engineers having some basic knowledge of the subject. This standard consists of the several parts, first one is the code of practice for general criteria, followed by design of quay walls, jetties and dolphins - design of drydocks, locks, shipways, shipbuilding berths, shiplifts, dock and lock gates - code of practice design of fendering, mooring systems, dredging and land reclamation - design of inshore moorings, floating structures, and breakwaters. Note that the offshore structures are not covered by this Code.
Same applied to the structures in inland waters. Additionally, note that this Code does not provide any guidance on the financial criteria though it is understood that proper economic evaluation shall be made for each project associated with the engineering criteria addressed by this Code.
The "Read Later" function allows you to add material to this block with just one click. Just click on the icon and read the articles that interest you at any convenient time.