Service and Operational Manuals — Diesel Engines

15.06.2021
LOW—SPEED ENGINES 2021

Nowadays, the international maritime shipping industry faces a really high demand for action. The subject action should result in the changes leading to the improvement of the situation with the environment and moving out of the current climate crisis. The overall success of the modern shipping industry will be limited with its flexibility, as well as the degree of responsiveness, so the parties involved are required to act timely and properly in order to duly meet all of today’s challenges.

The role played by the world famous WinGD started more than a century ago, and throughout its history, the company people did their best to promote the technological process and innovation. The present booklet is devoted to the low-speed engines manufactured by the company, starting with some brief historical background on their technical development.

The application of the engines in the merchant shipbuilding is explained together with the description of the power range and engine designations and maintenance. Then, the detailed technical information on each of the engine is provided with due attention paid to the IMO fuel compliance, which is one of the major areas of concern today.

1013 Views 0 Comments Read more
15.06.2021
H864 ACS 6000 AD—SD MARINE DRIVE — ABB COURSE

This perfect training course developed and officially released by ABB Marine Academy, one of the most respected entities in the world of marine engineering, is expected to take three days. On the first day the trainees will be given some general introduction, followed by the overview of the product including the key technologies applied, as well as the technical data, line supply unit and capacitor bank units, plus checking and exchanging the semiconductors.

The second day should start with the information on the inverter and excitation units, and water cooling unit. Finally, on the third day of the training the learners will be concentrating on such the important topics as control and terminal units, protection concept etc. note that the content of the documents included in the course, even though prepared for the classroom training, would still be equally useful when applied for self-studying.

Upon satisfactory completion of this course, the trainees will be able to describe the drives and applications, nominal data and essential features. They will also be good in describing the basic arrangement of the inverter drive system and identifying the available units, including their functions.

914 Views 0 Comments Read more
11.05.2021
MAN B&W DIESEL — S50MC—C8—TII PROJECT GUIDE — CAMSHAFT CONTROLLED TWO STROKE ENGINES

MAN B&W DIESEL - S50MC-C8-TII Project Guide - Camshaft Controlled Two Stroke Engines

2788 Views 0 Comments Read more
10.05.2021
CAT TYPE GCM34 GENERAL ENGINE OPERATING INSTRUCTIONS

The official operating instructions for the GCM34-type diesel engines produced by CAT. This technical book is starting with some general info on the engine and introduction to its safety features, gas regulating unit and brief yet thorough overview of the electrical system, etc.

The main content of the publication provides required information relating to the initial operating of the engine, operational supervision, running-it and fault tracing.

Particular attention has been paid by the compilers of the Instructions to the installation of the engine, regulations and care, emergency operation of this engine and a wealth of other relevant data and information.

3082 Viewing 0 Comments Read more
23.08.2017
MAN B&W DIESEL — S26MC6 PROJECT GUIDE — CAMSHAFT CONTROLLED TWO STROKE ENGINES

MAN B&W DIESEL - S26MC6 Project Guide - Camshaft Controlled Two Stroke Engines

2639 Views 0 Comments Read more
23.08.2017
MAN B&W DIESEL — S50MC—C7 PROJECT GUIDE — CAMSHAFT CONTROLLED TWO STROKE ENGINES

MAN B&W DIESEL - S50MC-C7 Project Guide - Camshaft Controlled Two Stroke Engines.

2985 Views 0 Comments Read more
23.08.2017
MAN B&W DIESEL — S60MC6 PROJECT GUIDE — CAMSHAFT CONTROLLED TWO STROKE ENGINES

MAN B&W DIESEL - S60MC6 Project Guide - Camshaft Controlled Two Stroke Engines

2364 Viewing 0 Comments Read more
23.08.2017
WARTSILA 20 — PROJECT GUIDE FOR MARINE APPLICATIONS

The Project Guide offered hereby has been prepared for the Wartsila 20 marine diesel engines; it is intended to provide the marine engineers, crew members and other people involved with the system proposals as well as engine data for the early design phase of installations.

The Guide itself includes following chapters: general data and outputs; operating ranges; technical data tables; description of this engine; piping design, its treatment and correct installation; fuel oil system; lubricating oil system; compressed air system; cooling water system; combustion air system; exhaust gas system; turbocharger and air cooler cleaning; exhaust emissions; automation system; electrical power generation and management; foundation; vibration and noise; power transmission; engine room layout; transport dimensions/weights; dimensional drawings, and several annexes.

Apart from the Project Guide, this set of files also includes manuals and supplementary helping files covering propulsion control systems, controllable pitch propeller solutions, technology reviews for each of the diesel engines, ecology - enviro-engine concept, marine reduction gears, steerable and transverse thruster solutions, etc.

3835 Views 0 Comments Read more
« 1 2 3 4 ... 10 11 »
Enter the site
Read Later

    The "Read Later" function allows you to add material to this block with just one click. Just click on the icon and read the articles that interest you at any convenient time.

Top Posts
Rate my site