21.09.2018
SEAGULL CBT — CD0003 — SAFETY EQUIPMENT

You are invited to start the third of the training modules presented by Seagull and this one is devoted to the shipboard safety equipment. The whole content of the course has been arranged in four section. The first section is dealing with the relevant rules and regulations - the trainees shall obviously possess a clear understanding of the rules and know how and when their provisions apply.

The second section is covering the fire extinguishing agents and explains the fire classes per the existing classification. The third section will guide you through the types of the fire fighting appliances commonly used on board ships so that you get necessary understanding of their construction and practical use. Finally, the closing section of the training module addresses the shipboard life saving appliances and arrangements.

Upon completion of the course the trainees will significantly improve their skills and this will definitely help in their careers and, moreover, in provision and promotion of the safe working culture on board every ship they serve. Having due knowledge of the shipboard fire fighting and lifesaving arrangement is of course the most important part of their profession.

52 Viewing 0 Comments Read more
07.09.2018
SEAGULL CBT — CD0002 — SHIP GENERAL SAFETY

This is the second part of the multi-volume training course presented by Seagull AS for the computer based learning, and this part is devoted to the general ship safety. The course is intended to help trainees identify that the provisions of the ISM Code seek to improve the management on board ship and at sea with the ultimate goal to reduce the number of accidents that are caused by the human factor.

It will also show that a poor cargo loading or ballasting techniques, when combined with the heavy weather or corrosion can eventually result in the total lost of the ship - the trainees will know how to avoid such situations. They will also get to know and understand the correct planned maintenance procedures and operational techniques to apply them and avoid any failures of the ship systems. The course is also covering the factors normally increasing the risks to the ship safety in connection with the navigation and communication techniques.

The main types of marine pollution have also been dealt with and particular attention has been paid to the provisions of the MARPOL convention and relevant annexes. In short, people who satisfactorily complete this module, will get much better understanding of all factors that contribute to the general safety of their vessel.

158 Views 0 Comments Read more
26.08.2018
SEAGULL CBT — CD0001 — PERSONAL SAFETY

This training module is the opening part of the world respected learning series developed by Seagull. We all know, it is sad true that the injuries and accidents keep happening despite the worldwide implementation of the ISM Code. Even if the good procedures are established and in place, the personal choices made by the people working on board, and safety culture can actually be of critical importance and mean the difference between safe working condition and incident.

Within this module, the trainees are offered to check the procedures and initiatives intended to increase the human safety, and it is emphasized that it is human making choice that will eventually keep him or her safe. The learners who have successfully completed the course will get a proper understanding of the "safety culture" and be able to recognize all benefits of timely reporting all shipboard incidents and accidents as well as near misses. They will also recognize how important it is to perform shipboard familiarization.

The ISM Code has been paid particular attention and it is underlined that the safe work procedures must be followed at all times. In addition, the trainees will get to know the fundamental sources of the relevant rules currently in place. The main thing to understand, of course, is that the safety of the people working on any ship is a matter of their own responsibility...

158 Views 0 Comments Read more
12.08.2017
VESSEL STRUCTURAL CONDITION

This training software was specifically developed by Seagull and, as implied by the title, covers vessel structural conditions. It forms a part of the popular and recognized Seagull CBT (i.e. computer based training). The present module will was released with the intention to provide officers and crew with necessary basic understanding of structural risk factors as well as the forces acting on a vessel both internally and externally.

This is critically important for proper maintenance and survey of critical areas of the vessel. The crew members who take this course would significantly improve their theoretical knowledge of the structure of the vessel, forces acting to the hull of the ship, possible hull failures, proper maintenance and protection etc.

The software would also be very useful to the students - future naval architects and ship constructors - who definitely have to possess a good theoretical knowledge of the above stated items, i.e. the program may be used as a good practical supplement to the main training material. In addition to what is stated above, it might be used by all other parties involved in the ship construction, ship repair, design of the future hulls since it addresses the very fundamental topics in the shipbuilding.

9193 Viewing 0 Comments Read more
Enter the site
Read Later

    The "Read Later" function allows you to add material to this block with just one click. Just click on the icon and read the articles that interest you at any convenient time.

Top Posts
Rate my site
Copyright MyCorp 2018