- - - - - - download - - - - - -
This presentation by SIGTTO applies to the valves installed on board liquid petroleum gas vessels, but it can provide guidance to such valves on LPG terminals, as well. It is intended to serve as a supplemental guide to be used together with the relevant standards and codes for LPG valves and shall not override them. In this book such an important issues as valve design, specific design consideration for ESD (emergency shutdown) valves, valve testing, material requirements and codes and standards, have been addressed. The publication is mostly intended to provide necessary technical guidance to the designers and/or operators on the applicable general requirements for valves for LPG service, designed for an operating temperature ranging between -55 and +80 degrees Celsius. Though the document was specifically developed to apply to LPG vessels, the provisions contained in it may be equally applied throughout the liquefied petroleum gas industry. Note, however, that this paper shall not override any national/international standards or codes. The appendix at the last part of the document provides considerations to be taken into account during the periods of construction and maintenance.